Used primarily for motor driven applications, manual BiSlides may be a better choice because:
-- they are less expensive when compared to Series A40, A60 or B90 UniSlides when travel distances greater than 20"-30"
-- you want a stage that is easily converted from manual to motor driven use
-- you require hard coat anodized finish (standard for BiSlides). And you need it soon.
-- they do not require adapter plates or brackets to make multi-axis systems
-- higher cantilevered load capacity when compared to comparable UniSlides
Nut Material: UHMW
Lever Material: 303 SS
Knob Material: Black Duroplast (fiber reinforced Bakelite) with spring steel insert
Lever Orientation: Normally Right (looking from Knob/Motor end) but Left on Motorized
Lever Engage/Disengage Force: 2.5 lbs Typical
Lever Engage/Disengage Angle: 13º
Lever Engage/Disengage Distance at Knob: 0.95"
Knob distance from BiSlide (Base): 1.7"
Design Life: 100K cycles
Lubricant: BiSlide BL-1 Only or None
Environmental: Same as Std. BiSlide