|
Extra Length Sliders (Carriages)
for UniSlide® Assemblies
- improve performance with cantilevered payloads
- increase surface area for mounting payloads
The standard slider length is equal to dovetail
base width.
Series |
Standard Slider Length |
Optional Slider Length* |
A15 |
1.5 " |
2" or 3" |
A25 |
2.5" |
3" or 4" |
A40 |
4" |
6" |
A60 |
6" |
8" |
B90 |
9" |
12" |
| How to Specify:
Specify Optional Sliders by changing
the "S" value in the UniSlide Model number. e.g. A1506B-S1.5
changes to A1506B-S3 to spec a 3" slider.
|
Remember! Choosing
a longer length slider reduces the standard travel distance.
You may need a longer base length to have sufficient travel
distance. |
| Drawings showing location
of slider mounting holes |
| Choose a Series: A15,
A25,
A40,
A60,
B90 |
Cost
| A15 |
A25 or B25 |
A40 or B40 |
A60 or B60 |
B90 |
S2 $17 |
S3 $25 |
S6 $34 |
S8 $37 |
S12 $47 |
S3 $30 |
S4 $32 |
|
|
|
Example
Extra length sliders are used to improve performance in this 3"
x 12" Rapid
Advance XY system because the UniSlide
Assemblies are inverted. Payload is a light weight wafer.
I want more than
one slider in my dovetail base.
|
|
