Manual Products - Combining UniSlides

HOME > MANUAL PRODUCTS HOME > COMBINING UNISLIDES

1 (800) 642-6446 or 1 (585) 657-6151 (in NYS)


	XY Adapters

	XZ Adapters


	Send us a RFQ



	Selecting the right size

Multi-axis systems are made by combining individual UniSlides with XY Adapter Plates and Brackets
Click the image for a larger view.	Here, the X axis (yellow) is combined with the Y-axis (blue) using the XY adapter plate (pink). The Z axis (green) connects to the Y-axis using the orange XZ adapter bracket. See application examples for: 2 axes 3 or more
We also offer low-profile Assembled XY systems with large base plates in A25, A40 and A60 Series.
	When making multi-axis systems, it is wise to consult with us for the best solution. In this multi-axis system photo, the larger A60 Series UniSlide supports the smaller A40 and A25 Series UniSlides.
When selecting the right size UniSlides, be mindful of the cantilevered or moment load on supporting units. Tell me more.
	Photo, left: B6900 Elevating table is mounted on B9000 Graduated Knob Type UniSlide. Using the "B" profile base on the bottom slide provides the necessary clearance for the hand wheel. More

Assembled XY Tables
Although any two UniSlide Assemblies in combination offer a very wide variety of XY possibilities, we also offer these assembled XY tables.		Two low-profile AXY2500 (2..31"H) model XY tables. Travels: 2" x 2" 3" x 3" 4" x 4"
These tables feature a large top work surface combined with a stable base, and can provide load handling from 25 to 100 pounds.		AXY40 XY table Travel: 2" x 2", 5" x 5". Also, available motorized.
Same as above but made with A60 6" wide UniSlides.		AXY60 XY tables Travel: 3 " x 3", 6 " x 6". 9" x 9"

More examples
The YZ units are rotated by the turntable.
The Z axis is end-mounted to the X axis with an XZ adapter plate. The Z axis can be positioned facing any one of four directions.

<>