Manual Products - Series and Types

You are here > HOME > MANUAL PRODUCTS HOME > SERIES PAGE

1 (800) 642-6446 or 1 (585) 657-6151 (in NYS)


	Input your specs

	Options

	Send us email for help


	How to measure travel

	How to choose a type


	Mail me your catalog



	Rotary


	Input your specs

	Options

	Request help


	Mail me your catalog



	Download CAD file

This page shows you the six types of Series A60 UniSlides below.
Specific benefits of each type (such as Screw Drive, Graduated Knob, Rapid Advance or Position measurement) are listed.

Once you decide on a type, Spec it will give you a specific Model Number and cost.
Dimensional Drawings: Acrobat.pdf or .Gif
Maximum Travel is 84" varies depending on Type.

Load Capacity
Horizontal (Dynamic Central) = 240 lbs. or 109 kg.
Vertical (Dynamic Central) = 100 lbs or 45 kg. except Rapid Advance Models
Cantilevered = 320 lb.-in. or 369 kg.-cm.

COMBINING UNISLIDES: To combine two or three units

CAD files: Click here for 2D; for 3D: go to Spec it and enter model type and travel.

OPTIONS: For locks, way covers, optional finishes, revolution counter and right angle gear drive. Also, see Weight s Series A60 Catalog pages

	Free Sliding UniSlide

Feature	Linear Dovetail Bearing
Benefit	Linear motion
Travel	Models with travels from 0-60 inches Spec Free Sliding!

	Screw Drive UniSlide*

Feature	Lead screw drive
Benefit	Screw controlled positioning
Travel	Models with travels from 0-60 inches Spec a Screw Drive A60 Series!

Measured Travel: Graduated Knob Model
	Graduated Knob UniSlide Details

Feature	Accurate lead screw, engraved knob and lithographed scale
Benefit	Measure position to 0.001" or 0.01 mm I need higher resolution
Travel	Scale version as shown: 0-36 inches Counter version: 0-66 Spec Graduated Knob!

Measured Travel: Scale and Vernier on Screw Drive
	Scale and Vernier UniSlide

Feature	Screw drive plus scale and vernier
Benefit	Measure position to 0.001" or 0.05 mm I need higher resolution
Travel	Model from 0-36 inches Spec Scale and Vernier!

With Rapid Advance Feature
	Rapid Advance Models H UniSlide

Feature	Rapid Advance, Lead Screw with "clutch" drive system
Benefit	Greatly reduces repositioning time by temporarily disconnecting from drive screw.
Travel	Model from 0-42 inches Spec Rapid Model H!

With Rapid Advance Feature and Measured Travel
	Rapid Advance HE and HM with Scale and Vernier UniSlide

Feature	Rapid Advance with a Scale & Vernier
Benefit	Fast gross positioning. Greatly reduces repositioning time by temporarily disconnecting from drive screw; measure position to 0.001" or 0.05 mm
Travel	Model from 0-21 inches Spec Rapid Model HE/HM!

Combining UniSlides

View examples of combina-
tions

UniSlide XY and XZ Adapters

Choose different size