| |
Example
J1
Choose a UniSlide linear dovetail slide
A59 and
A48 Rotary Tables |
 |
Example
J2: Three axis system (1.5" travel/axis) using Series
A15. Note vernier is offset to avoid view being blocked by
XZ adapter plate. Vernier resolution is 0.05 mm
X and Z
axes stages (travel not measured)
Y
axis stage (measured travel)
XY adapter plate
XZ adapter plate |
Example J3 Large system for 50 lb payload. Bottom
2 are A60 Series
supporting B49 Elevating
Table.
|
|
Example J4 - A 3 axis, 2" x 2" x 1.5",
unit for medium payload. X
and Y stage Z
stage
|
 |
Example
J5
Two
A60 UniSlides lifted with B69 elevating table. Options include
graduated knob, slider locking screws and strengthening gussets. |
|
Example J6
Three units combined for XYZ movement
Top
stage
Middle
stage
Bottom
stage Read more about elevating tables like this. |
| |
Example
J7
Small, compact XYZ system made with 3 A1503 UniSlides used
for a test fixture.
Travel is 1.5"x 1.5" x 1.5". Other travels
available.
Show
this particular slide details. |
Example
J8 - A 3 axis system with linear encoders. Resolution
is 5 or 1 micron depending upon encoders chosen.
|
|
Example
J9 - 3 axis system with graduated knobs. Resolution
= 0.001" or 0.1mm |
|
Example
J10
Part of a multi-axis system for NASA |
|
Example
J11
Large XZ with 3 theta (rotary
tables) for 6 degrees of freedom.
Click photo for larger view |
| |
|
 |
Example
J12
Manual X axis moves motorized Y and Z axes |
|
Example
J13
B6915 Elevating
table (Z axis) on top of AXY2512W1XY
table.
Travel is 4"x 4" x 9" |
|
Example
J14 - A 3 Axis plus rotary (theta). Our B4003XZ
XZ bracket provides the mounting surface for the payload |
|
Example
J15
Model B2909 Elevating
table (Z axis) on top of AXY4006W1 XY
table. Travel is 2" x 2" x 6" |
 |
Example
J16
Very similar to J15 above but with larger payload capacity
using AXY60 XY table (sans top plate) and B49 Series elevating
table. |
 |
Example
J17
A three axis A25 Series system for moving <15 lbs. 1.5" x 1.5" x 3.5". Also available with measured travel. Click for details of individual units:
X and Y axis stages
XY adapter plate
Z axis
XZ adapter bracket |
 |
Example
J18
A multi axis system for drilling using UniSlide and XSlide Assemblies. |
 |
Example
J19
A 3 axis measured travel system for positioning 2 probes within a tank (not shown). System mounted on base of Velmex frames |
 |
Example
J20
A 4 axis system- 2 linear plus tilt and pan adjustmant. Payload can be attached to A2501XZ bracket or directly to A5990TS rotary table
|
)
