Example 1: This is Model 5005B Right angle gear box on Series A25.
	Dimensions of right angle gearbox. The style is only compatible with Series A or B25 and Series A or B40

Example 2: For A/B60 and B90 Series, we use a larger gear box. Click on photo for better view.
		Dimensions of right angle gearbox shown above on A60 UniSlide assembly. This style is only compatible with the Series A or B60 and Series B90. 3D Model

Example 3: Combined with scale and DRO for 0.1 mm read-out.in A40 Series UniSlide

Example 4: Also, we have BiSlide Systems like this. The knob raises and lowers the carriage (silver). Length of stroke and length of offset are user definable.
Example 5: A60 Graduated Knob unit right angle gear drive
Example 6: BiSlide with counter. Resolution = 0.001"

Example 7: XZ system

Example 8: Right angle gear drive pointing up with double Rapid Advance Model H sliders.

Example 9: BiSlide with side drive knob. Details.

Example 10: When used with a Graduated Knob style, there is slightly more system backlash then with the direct drive model. Resolution is 0.001" or 0.01 mm.

Example 11: Model SPA4015K1-S6-TL. Modified Screw Motion UniSlide with Scale and Vernier, optional 6" slider, and thread lock screw.

Example 12 Close-up of right angle gear option with Series A25

Spec this option for a UniSlide Assembly:
This option is only available at the time you order a UniSlide.
Control knob can be positioned any one of four ways:
up, down left or right. Order Right Angle Gear drive as follows:

P-N 5005B-A3-U = UP P-N 5005B-A3-D for DOWN P-N 5005B-A3-L for LEFT P-N 5005B-A3-R for RIGHT Contact factory for BiSlide Models.

3D Models

	Series A/B25 & A/B40	Coming Soon
	For Series A/B60 & B90 includes 2.75" diameter knob, right angle drive and intermediate block. Orientation: Left or Right	Model Model
	For Series A/B60 & B90 includes 2.75" diameter knob, right angle drive and intermediate block. Orientation: Up or Down	Model Model