| Each plate has a hole pattern
that mates the slider of the lower (X) UniSlide, and at right
angles to that, a pattern matching the base of the top (Y)
UniSlide. Select the adapter plate to
match the Series of the lower UniSlide you will be using.
For example, use the A4000XY Adapter Plate with A40 Series
UniSlides.
|
There are other uses for these plates too.
They can be used as auxiliary payload mounting plates or as
intermediate plates between the load and the slider. This provides
more mounting surface area, and is also a quick way to change
loads while maintaining their alignment to the UniSlide. And
they provide an easy way to mount a UniSlide upside (slider)
down. |
