A3
Make
together-apart motion for centering operations with one base, two carriages and a lead
screw that is half right and half left. More
A4
MA
UniSlides have a lower height (profile) and come in 4
Series (widths) Chose
a Series
A5
Small vertical UniSlide
for lifting on XZ adapter plate
A6
UniSlides
are tailored to your needs. Here a side mounted, belt
driven, motor reduces length. This unit also has external
adjustable limit
switches.
A7
The
9" W x 3.13" H Series
B90 is the heaviest UniSlide
we make
A8
For high speed and/or long (up to 18.3 ft./5.6 m) travel we have belt driven BiSlide stages.
A9
XSlide Assembly for linear positioning in a high temperature (130ºC) environment. Uses hi-temp motor, drive nut, wires and lubricants.
Motor Driven Two Axis Linear Slides & Rotary Indexing Tables
B9
A Two axis BiSlide system for measuring air content in concrete samples. Details.
B10
Low profile XY table with 2" x 2" travel using
MA40 UniSlides. Height is approximately 3.2". Top plate is 4" x 4"
B11
A 2" x 5" system.
Payload is mounted on top of platform.
B12
This completely standalone unit is powered by a small DC battery. The programmable step motor controller can be programmed remotely via Bluetooth. Components include battery, XY table with limit switches, support frame, programmable step motors and controller
Three
Axis and Parallel Coupled BiSlides
C 1
For light payloads, a three axis system of XSlides.
A multi axis experimental system for moving 2 sensors above and below and central horizontal plane. The distance between the two XY tables is adjusted by a manual, vertical cemtering BiSlide with a ½ left and ½ right hand thread lead screw. The entire system is raised or lowered by a second manually adjusted BiSlide in the rear. Support is supplied by a Velmex designed base.
)
)
)
)
)
)
)
)
)
D4)
){kind=link}
){kind=link}